Be safe around electricity when moving farm equipment 

By
Posted on Aug 26 2024 in Safety
farm equipment

As harvest season ramps up in Indiana, farmers and their crews are busy moving equipment to and from the fields. This increased activity, however, raises the risk of accidents, especially involving electricity, cautioned Jon Elkins, vice president of safety, training and compliance at Indiana Electric Cooperatives. 

“Combines and grain augers are large pieces of equipment,” said Elkins. “People assume everything will fit under the power lines, but that isn’t always the case. The biggest cause of electrocutions on farms is equipment accidentally touching power lines.” 

To prevent such dangerous incidents, Indiana Electric Cooperatives offers the following safety guidelines: 

Observe your surroundings. Always check above and around before moving or raising equipment. Remember, power lines can sag, especially in hot weather. Maintain a minimum clearance of 10 feet from all power lines and poles. 

Never try to raise power lines to allow tall equipment to pass through. Even non-metallic objects like wood poles or branches can conduct electricity. 

Be cautious around power poles. Striking a pole can cause it to break and drop live wires onto your equipment. 

Lower equipment properly. Ensure that equipment like grain augers and other portable equipment are fully lowered before transporting. 

Use a spotter. When navigating near power lines, having a spotter can enhance safety by providing an extra set of eyes. 

Plan your route. If there’s any doubt equipment will clear a power line, opt for an alternative route. 

Stay put in emergencies. If you’re in equipment that touches power lines, stay in the cab and call for help. Tell others to stay away. In the rare case of a fire and an emergency exit is necessary, jump clear without touching the ground and the equipment simultaneously, then shuffle with both feet together for at least 30 feet to avoid electrical shock. 

“Working the land has enough hazards in the work itself,” said Elkins. “With care and planning, moving to and from the fields shouldn’t be one of them.”

Knowledge is power Anyone who operates farm equipment and augers should be educated about safe operating procedures and hazards, including the possibility of coming in contact with electric lines. Be alert when you’re at work!